This project involved a full roof replacement on a traditional house in Taunton, Somerset. The existing slate roof had reached the end of its working life and was beginning to show signs of general wear, weathering, and movement in several areas. A full roof replacement was the most suitable way to restore the roof and ensure long-term protection for the property.
QTS National carried out the work as part of a domestic roofing service. The property sits within a typical residential street in Taunton, where many homes share similar construction and age. Roof replacement work of this type is common across the town, particularly on older terraced properties where original roofing materials have naturally deteriorated over time.
The aim of this was to renew the entire roof structure while keeping the character of the property intact. Careful attention was given to reusing existing materials where possible, helping maintain a traditional slate finish that suits the surrounding homes in Taunton.
Roof Replacement Preparation & Access
Before the roof replacement began, scaffolding was installed around the full perimeter of the property. This provided safe working access for the team and ensured all stages of the roof replacement could be completed securely.
Once access was in place, the roof was inspected in more detail to confirm the condition of the existing materials. The decision was made to proceed with a full strip and reinstall approach as part of the roof replacement, allowing the structure beneath the slates to be fully renewed.
The property remained fully protected during this stage of the replacement, with care taken to minimise disruption to the homeowners and neighbouring properties, which is especially important in tightly spaced terraced streets in Taunton.
Removal Of Existing Roof Covering
The first main stage of the replacement involved the careful removal of the existing slate covering. Each slate was taken off by hand to avoid unnecessary damage, with usable slates separated for reuse later in the process.
Once the slates were removed, the old roofing felt and battens were stripped away. These materials had reached the end of their lifespan and were no longer providing reliable protection. Removing them completely was an essential part of the roof replacement to allow a fresh structure to be installed.
All waste materials from this stage of the roof replacement were cleared from site and disposed of responsibly in line with current waste handling standards. This kept the working area clean and safe throughout the project.
Installation Of New Roofing Structure
With the roof stripped back, the next stage of the replacement involved preparing the structure for new materials. A breathable roofing membrane was installed across the entire roof area. This is an important part of modern work, as it helps improve ventilation while protecting the internal roof structure from moisture.
New roofing-grade battens were then installed over the membrane. These battens form the fixing points for the slates and are a key structural element in any roof replacement. Care was taken to ensure correct spacing and alignment, providing a strong and even base for the reinstated roof covering.
This stage of the roof replacement also provided an opportunity to correct any minor irregularities in the roof line, ensuring a smooth and consistent finish once the slates were put back in place.
Reinstallation Of Slate Roof Covering
Once the new base structure was complete, the roof replacement moved on to reinstating the slate covering. Wherever possible, the original slates were reused. This helped retain the traditional appearance of the roof while also keeping the roof replacement more sustainable by reducing waste.
Any broken or damaged slates identified during removal were replaced with reclaimed slate sourced from local suppliers. This ensured a good visual match and helped the new sections blend naturally with the existing material. Using reclaimed slate is often an important part of roof replacement work on older properties in Taunton, where maintaining character is a priority.
The slates were carefully fixed back into position in line with standard roofing practice. The team worked methodically across the roof replacement area to ensure consistent alignment, correct overlaps, and a secure finish across the entire surface.
Throughout this stage of the roof replacement, attention was given to detail around edges, ridges, and junctions to ensure full weather protection once the project was complete.
Roof Replacement Outcome & Completion
The completed roof has restored the property to a strong and weather-resistant condition. The new breathable membrane and battens provide a solid foundation for the slate covering, improving both performance and longevity.
From a visual perspective, the replacement has also refreshed the appearance of the property while keeping its original character. The use of existing slates, combined with reclaimed materials, has helped the roof blend naturally with surrounding homes in Taunton.
The homeowner now benefits from a fully renewed roof structure designed to withstand changing weather conditions and reduce the risk of future issues. This type of replacement is a long-term investment in the property, offering improved protection and peace of mind.
Overall, this project demonstrates a careful and practical approach to work on a traditional house in Taunton. It combines traditional materials with modern roofing methods to achieve a reliable and lasting result.
Contact Us For A Roof Replacement In Taunton
If you are looking for a roof replacement in Taunton or surrounding areas of Somerset, QTS National can help. We are local roofing and roof repairs specialists with more than 20 years of hands-on experience in the industry. Our team is fully qualified and fully insured. We also work across domestic, commercial, and industrial roofing projects of all sizes.
Get in touch with our team today to discuss your requirements and arrange a consultation.
